Please kindly be noted that we have released new firmware Version 3.2.2 of Vigor2930 series. You could download the formal released firmware from following URL: https://www.draytek.com/support/download/Vigor2930.php.

Please refer the new functions and improvement.

[New Functions]
1.  Support Microsoft SSTP.
2.  Support AES for IKE Phase 1.
3.  Support DPD and NAT-T for IPSec aggressive mode.
4.  Auto dial in load balance to improve VPN bandwidth by dual WAN.
5.  Support Vista L2TP IPSec VPN.
6.  Support \"voip dsp debounce\" command for adjusting debounce timer.
7.  Support Email alert when ISDN line backup.
8.  New Wireless Advertisement function which can define first login page.
9.  Support web login /logout.
10. Support WAN1/WAN2 only mode for DDNS.
11. Support new DrayTek DDNS (used in China only) for DDNS.
12. Support \"Change default route\" in WAN2 backup mode for VPN.

[Improvement]
1. Fix the problem that \"WAN1 First\" mode must reconnect when WAN1 recovers.
2. \"ISDN Network\" IVR can be disabled in VoIP advance settings.
3. Fix the problem about syslog can\'t send out via VPN tunnel.
4. Allow to enable/disable bandwidth limit for 2nd subnet.
5. Allow to enable/disable load balance policy auto failover to the other WAN.

Some issues have been fixed and detail improvements are listed on the release note. If you have further questions, please contact support@corecasys.com.