Technical Specifications of Vigor2130
|
Hardware Interface |
4 x 10/100/1000 base-Tx LAN Switch , RJ-45 |
1 x 10/10/1000 based-Tx WAN Port, RJ-45 |
2 x USB Host 2.0 |
1 x Factory Reset Button |
IP Version |
IPv4 |
IPv6 |
Dual WAN |
3.5G Backup |
Switch |
4 Gigabit LAN Ports |
Port-based VLAN |
Layer-2 (802.1p) QoS |
802.1q Bridge |
IGMP Snooping |
Bind IP to MAC Address |
VPN |
2 VPN Tunnels |
IPSec LAN to LAN, L2TP over IPSec * and PPTP Remote Dial in |
Encryption : 3DES, AES |
Authentication : MD5, SHA-1 |
IKE Authentication : Pre-shared Key |
DPD |
VPN Pass-through |
PPTP MPPE |
VPN Aggressive Mode |
Firewall |
DMZ Host, Open Port, Port-redirection |
ACL (Access Control List) |
MAC Address Filter |
SPI (Stateful Packet Inspection) |
DoS / DDoS Prevention |
IP Address Anti-spoofing |
Web Syslog |
Logging via Syslog |
E-mail Alert * |
USB |
File System
(throughput with above 2Mbps) |
Support FAT32/FAT16 File System |
Support FTP Function for File Sharing |
Support Samba for Windows File Sharing |
BT Client * |
Printer Sharing |
WAN Protocol |
DHCP Client |
Static IP |
PPPoE |
PPTP |
L2TP |
Bandwidth Management |
Layer 2/3 QoS by Ethernet Type, VLAN ID, TCP/UDP Port, DSCP, ToS, Tag Priority |
QCL (QoS Control List) |
Bandwidth / Session Limitation |
Network Feature |
DHCP Server |
Dynamic DNS |
NTP Client |
UPnP |
IGMP Proxy V2 |
DNS Cache/Proxy |
Static Routing |
Network Management |
Web-based user Interface (HTTP/HTTPS) |
Quick Start Wizard |
CLI (Command Line Interface, Telnet/SSH) |
Configuration Backup/Restore |
Built-in Diagnostic Function |
Firmware Upgrade via WUI |
2-level User Management (admin/user) |
Administration Access Control |
Logging via Syslog |
Management Session Timeout |
SNMP Management MIB-II* |
Temperature
|
Operating : 0°C ~ 45°C |
Storage : -25°C ~ 70°C |
Humidity |
10% ~ 90% ( non-condensing ) |
Max. Power |
10 Watt |
Dimension |
L216.4 * W147.8 * H53.5 ( mm ) |
Power |
DC 12V |
|