Technical Specifications of Corecasys Switch G2240
|
Interface |
24 x 10/100/1000Mbps Ports, RJ-45 |
4 x SFP Dual-media Ports (Shared with 4 Gigabit Ports) |
1 x Console Port |
1 x Restart Button |
Standard Compliance |
IEEE 802.3x Flow Control Capability |
IEEE 802.1q VLAN |
IEEE 802.1p QoS |
Performance |
Switching Capacity |
24 Gigabit Ethernet Ports with Non-blocking Wise Speed Performance |
8 K MAC Addresses |
Supports Jumbo Frame, Up to 9K |
Broadcast / Multicast Storm Suppression |
Port Mirroring |
VLAN |
Port-base VLAN |
IEEE 802.1q Tag-base VLAN, Up to 4K Active VLANs |
Support Q-in-Q VLAN |
Multicast VLAN Management |
VSM |
Up to 16 Switches Can be Managed via Single IP |
Virtual Stacking, No Extra Stacking Hardware and Physical Central Wiring Closet are Needed |
QoS |
Supports QCL for Layer 4 TCP/UDP Port and ToS Classification |
Supports IEEE 802.1p QoS with Four-level Priority Queue |
Supports Priority in a Q-in-Q Tag |
Bandwidth Control |
Supports Bandwidth Rating Per Port Ingress and Egress Rate Limit 500kbps ~ 1000Mbps with 1Kbps |
Forwarding rate (based on 64-byte packets) : Up to 35.7 mpps |
Protocol |
LACP |
Port Trunking with 12 Trunking Groups |
Up to 16 Ports for Each Group |
GVRP / GARP |
IEEE 802.1q with GVRP / GARP |
Multicasting |
Supports IGMP Snooping Including Active and Passive Modes |
STP / RSTP / MSTP |
IEEE 802.1d / IEEE 802.1w / IEEE 802.1s |
Network Security |
IEEE 802.1x Access Control for Port Based and MAC Based Authentication |
Management Access Policy Control |
Access Control List |
IP-MAC-Port Binding |
DHCP Relay Agent |
SNMPv1, v2C Network Management |
RFC 1213 MIB (MIB-II) |
Interface MIB |
Address Translation MIB |
IP MIB |
ICMP MIB |
TCP MIB |
UDP MIB |
SNMP MIB |
RFC 1757 RMON MIB |
Statistics Group 1 |
History Group 2 |
Alarm Group 3 |
Event Group 9 |
RFC 1493 Bridge MIB |
RFC 1643 Ethernet MIB |
Enterprise MIB |
Operation Voltage |
100-240 V |
Consumption |
30W |
Weight |
2.82Kg |
Dimensions |
209 x 442 x 44 mm |
Warranty |
2 Year Limited |
|
|